ALPHA 95

  • Minimum efficiency is 95% on 0.90 micrometer particles
  • Manufactured in a variety of wood and metal frame types
  • Available with a media pack with aluminum separators or without separators pack
  • Available in a variety of sizes with either a gasket seal or gel seal

ALPHA 2000

  • Efficiencies are 99.97% and 99.99% on 0.30 and 99.9995% on 0.12 micrometer particles
  • High capacity Alpha 2000 filters can reduce the filters can reduce the filter bank size
  • Corrugated aluminum separators stabilize the moisture-resistant media pack (separator style)
  • Available as a separatorless media filter with a self-supporting media pack
  • Available in a variety of frame materials in gasket or fluid seal design


ALPHA B-1 FRAME

  • All-welded 14 gauge galvaneal steel construction for corrosion resistance and rigidity
  • Stainless steel locking arm and screw assemblies secure and seal the HEPA filter
  • Factory-drilled alignment holes facilitate field assembly of built-up filter banks
  • Optional prefilter assembly is available for direct attachment to the frame


ALPHA CELL

  • Galvaneal frame
  • UL 900 Class II
  • Hemmed edge corrugated aluminum separators
  • Water resistant fiberglass media
  • Closed cell neoprene gasket
  • 99.97% efficiency on .3 microns



ALPHA FRAME

  • 14 ga. Galvanized steel frame for corrosion resistance and rigidity
  • Four spring-loaded swing-arm assemblies compress filter gasket for leak-tight seal
  • Flat smooth-finished gasket sealing surface is backed by a rigid standing flange
  • Pre-punched holes facilitate field assembly of built-up filter banks
  • Swing-arm retainers position filter properly in frame
  • Optional prefilter frame assembly available for direct attachment to swing-arm


ALPHA HT

  • Metal-frame separator-style
  • For applications with high-temperature requirements up to 1,000 ° F for exhaust air only and 500 ° F for supply air
  • Available with gasket or fluid seal
  • Minimum efficiency of 99.97% on 0.30 micrometer size particles


ASTR Frame

  • Filter holding frame and fasteners
  • Accepts any standard size panel, box or header type filter
  • Positive sealing integrity with side wall mounted fasteners
  • More information and cut sheets available upon request



A-4 Frame

  • Holding Frames for Gel Seal HEPA filters
  • Gel seal for the best protection against by-pass leakage
  • More information and cut sheets available upon request



B-1 Frame

  • Holding Frames for gasketed HEPA filters
  • All welded 14 gauge galvaneal steel construction for corrosion resistance and rigidity
  • More information and cut sheets available upon request


C-3 and C-4

  • Crank lock HEPA filter housing
  • Access for up to four filters and pre-filters wide per door for quick filter change-outs
  • More information and cut sheets available upon request


K-Trac

  • Modular Filter Framing System
  • Filters are tightly sealed to eliminate air by-pass
  • Modules are factory engineered with built-in stiffening
  • More information and cut sheets available upon request


SUPERFLOW 2K

  • V-bed HEPA (99.99% at 0.30 micrometer)
  • Designed for high airflow applications at an ultra low pressure drop
  • Can be used in systems with air velocities of 500 fpm and a pressure drop of 1.0 inch w.g.


Sureaire

  • Diffuser section
  • Diffuser plate helps distribute air more evenly across the final filter bank
  • Diffuser plate open area is 51%
  • More information and cut sheets available upon request


Sureflo

  • High air volume, low pressure, drop filter housing
  • Bank design doubles the filter face area reducing the face velocity of 50%
  • More information and cut sheets available upon request


Surelock-B

  • Bolt lock HEPA filter housing
  • Surelock-B side access HEPA filter housings are designed to accept all gasket-seal HEPA filters
  • More information and cut sheets available upon request


Sureseal

  • Two stage Prefilter and secondary filter housing
  • Accepts any standard size panel, box or header type filter
  • Positive sealing integrity with side wall mounted fasteners
  • More information and cut sheets available upon request